The fuses and rails for the 230V distribution have arrived. We can now start with the 230V cabling in our small data center.
Blog
Changeover to WordPress largely completed
We are a little proud to bring a new site online in this short time. The site cray-cyber.org now has a working certificate and can be reached uniformly at cray-cyber.org. The information on the old page is not lost and to call up 90% under cray-cyber.org/old, here we will still improve something, especially with photos from past days.
Cyber 960 installation
The last few days have focused on preparations for the operation of the Cyber 960 and spatial planning.

3000 Cable

960 Connection panel

Floor behind 960

First cable

960

Space planning
We reached the first place with our Cray Y-MP EL on the VCFe 19.0
We are very happy that our little Cray got so much attention. First place together with the arcade machines of “For Amusement Only” was the result of all the work.

Cray Y-MP EL at the LRZ.

Many visitors.

The Operators.

Terminal connected to the Cyber 173 emulator of Gerard van der Grinten in the Netherlands.

The Cray has safely arrived home.

The confirmation, chocolate from Switzerland. 🙂
I would like to thank our team and the organisers of the LRZ and VCFe.
Visit the Cray Y-MP EL at the LRZ Garching (Munich)
It’s done, our Cray is in the LRZ. From tomorrow until Sunday you can visit the Cray and if we have enough power, the machine will also be operable from the terminal.
We will be exhibiting the Cray Y-MP EL at the European Vintage Computer Festival.
The 19th annual “Vintage Computer Festival Europa” will take place on April 28th and 29th 2018. We exhibit our Cray! Come and see the machine live at the Leibnitz Rechenzentrum in Garching, just a bit North of Munich.
More informations: http://www.vcfe.org/E/
Installation of UNICOS successful!
We had some problems to reactivate our Y-MP EL after the long time in stock. Thanks to our spare parts for the Cray, we were able to get the system up and running.

Add the boards to our database.

256 MegaByte RAM.

CPU Board.

Installation complete.
We are very happy that the Cray Y-MP EL is running and we can exhibit the machine at the VCFe.
First steps for startup of the Y-MP EL and cleaning of the motor generator.

Cleaning and lubricating the motor generator after a long period of non-operation.

Cabling up the Cray Y-MP EL, studying the manuals.

Cleaning the air filters of the Y-MP EL – left before, right afterwards…

Backup of IOS ROMs.

Test of UNICOS tapes.

Powering up the Y-MP EL.
Transport of the first components to the new computer room.

Loading Cray YM-P EL and some CDC racks.

Unloading CDC Terminal.
First action, moved the floor.
cray-cyber.org restarts the computing centre in Grasbrunn near Munich.
First we need an adequate machine room, of course with professional raised floor. Today we moved and installed the floortiles.

Installing the raised floor.

Test, is it stable? 🙂
Next, the first machines will move in.
